MTK 10A版本编译出错怎么解决
找不到文件Error: C9932E: Cannot obtain license for Compiler (feature compiler) with license version >= 3.1:
Cannot find license file.
The license files (or license server system network addresses) attempted are
listed below. Use LM_LICENSE_FILE to use a different license file,
or contact your software provider for a license file.
Feature: compiler
Filename: C:\flexlm\license.dat
License path: C:\flexlm\license.dat;
FLEXnet Licensing error:-1,359. System Error: 2 "No such file or directory"
For further information, refer to the FLEXnet Licensing documentation,
available at "www.acresso.com".
--------------------编程问答-------------------- RVCT 3.1没破解吧? --------------------编程问答-------------------- RVCT 3.1没破解 --------------------编程问答-------------------- 我遇到的一种情况是,笔记本电脑,先在自己公司编译,没有问题,后来拿到其他公司,发现就出现楼主的错误。
后来才发现,是笔记本ip地址问题,需要重新设置对应公司的ip。
如果本身电脑就一直编译报错,可以尝试运行crack_fl.bat文件,破解试试 --------------------编程问答-------------------- 应该是rvct安装问题,尝试卸载arm再安装rvct,然后再安装arm。 --------------------编程问答-------------------- 很明显是ARM的license的问题啊,没有破解 --------------------编程问答-------------------- 应该是相关工具没安装好 --------------------编程问答-------------------- RVCT 3.1没破解吧? --------------------编程问答-------------------- RVCT 3.1没破解吧? --------------------编程问答-------------------- RVCT这东西 --------------------编程问答-------------------- 即使安装好了也会报这个错,都编译不完 --------------------编程问答-------------------- 把license文件夹下的license都删掉,重新安装一下license --------------------编程问答-------------------- 破解下rvct,要是increbuild编译报错,可能和联机编译有关,设置下ip或许管事。 --------------------编程问答-------------------- 不要设成固定的ip --------------------编程问答-------------------- 单机编译一下试试,如果正常,就能排除自己电脑编译环境的问题。那么很可能就是楼上所说IP的问题了。 --------------------编程问答-------------------- RVCT 3.1没破解吧,这种情况我也遇到过 --------------------编程问答-------------------- 是因为破解时需要填19处当前网卡的MAC地址,而你可能换了上网方式,也就是换了网卡导致不可以编译了。我之前碰到过了,在单位是有线网卡,家里是无线,在家报错,以为是license问题,后来启用有线网卡,编译成功!
补充:移动开发 , 移动开发其他问题