Linux简明系统维护手册(二)

答案：四、主要的软件安装

　　前面说过，我的习惯是，装系统的时候就安装一个内核和编译系统，得到了一个干净的系统后，再安装其他的软件就比较清晰。另一点，除非搞不到源代码版本，一般情况下我都会下载官方版本的源代码文件，来重新编译之。同样的，选择软件版本要根据该软件的Release Note来决定，并非越新越好。这就是为什么很多软件都是几个版本齐头并进的发展之原因。这些软件不同版本之间的安装方法会有少许不同，安装前一定要仔细阅读目录中的README文件和INSTALL文件，否则这些少许不同会造成不少得麻烦。下面描述的安装过程都核版本号紧密相关。另外，所有的软件都把程序文件的包拷贝到/usr/local/src目录中再解压缩，这是习惯。因为在Linux中习惯于把后来的软件装在/usr/local中。

　　(1)安装DNS服务器

　　1、从www.isc.org下载bind 域名服务器软件。我们这里用的是bind8.3.0，bind8分支和bind9分支是并行发展的。根据自己的实际情况选择合适的bind版本。

　　2、mkdir /usr/src/bind83

　　3、下载的文件叫bind-src.tar.gz，复制到/usr/local/src/bind83目录下。

　　4、cd /usr/local/src/bind83

　　5、tar zxvf bind-src.tar.gz

　　6、cd src

　　7、make stdlinks

　　8、make clean

　　9、make depend

　　10、make all

　　11、make install

　　12、编辑配置文件：/etc/named.conf内容如下，需要更改的部分用黑体标出：


　　/*
　　 * This is a worthless, nonrunnable example of a named.conf file that has
　　 * every conceivable syntax element in use.  We use it to test the parser.
　　 * It could also be used as a conceptual template for users of new features.
　　 */

　　/*
　　 * C-style comments are OK
　　 */

　　// So are C++-style comments

　　# So are shell-style comments

　　// watch out for ";" -- it's important!

　　options {
       directory "/var/named";                 
　　　　　　// use current directory
       named-xfer "/usr/libexec/named-xfer";   
　　　　　　// _PATH_XFER
       dump-file "named_dump.db";             
　　　　　　// _PATH_DUMPFILE
      pid-file "/var/run/named.pid";          
　　　　　  // _PATH_PIDFILE
      statistics-file "named.stats";          
　　　　　　// _PATH_STATS
      memstatistics-file "named.memstats";     
　　　　　　// _PATH_MEMSTATS
      check-names master fail;
      check-names slave warn;
      check-names response ignore;
      host-statistics no;
      deallocate-on-exit no;                  
　　　　　　// Painstakingly deallocate all
　　　　　　// objects when exiting instead of
　　　　　　// letting the OS clean up for us.
　　　　　　// Useful a memory leak is suspected.
            // Final statistics are written to the
            // memstatistics-file.
      datasize default;
      stacksize default;
      coresize default;
      files unlimited;
      recursion yes;
      fetch-glue yes;
      fake-iquery no;
      notify yes;    
　　　 　// send NOTIFY messages.  You can set
         // notify on a zone-by-zone
         // basis in the "zone" statement
         // see (below)
      serial-queries 4;               
　 　　　// number of parallel SOA queries
         // we can have outstanding for master
         // zone change testing purposes
      auth-nxdomain yes;             
         // always set AA on NXDOMAIN.
         // don't set this to 'no' unless
         // you know what you're doing -- older
         // servers won't like it.
      multiple-cnames no;             
　　     // if yes, then a name my have more
        // than one CNAME RR.  This use
        // is non-standard and is not
        // recommended, but it is available
        // because previous releases supported
        // it and it was used by large sites
        // for load balancing.
     allow-query { any; };
     allow-transfer { any; };
      transfers-in 10;               
　　　　 // DEFAULT_XFERS_RUNNING, cannot be
 　　    // set > than MAX_XFERS_RUNNING (20)
      transfers-per-ns 2;             
         // DEFAULT_XFERS_PER_NS
      transfers-out 0;                
        // not implemented
      max-transfer-time-in 120;     
        // MAX_XFER_TIME; the default number
        // of minutes an inbound zone transfer
        // may run.  May be set on a per-zone
        // basis.
     transfer-format one-answer;
     query-source address * port *;
　　/*
     * The "forward" option is only meaningful if you've defined
     * forwarders.  "first" gives the normal BIND
     * forwarding behavior, i.e. ask the forwarders first, and if that
     * doesn't work then do the full lookup.  You can also say
     * "forward only;" which is what used to be specified with
     * "slave" or "options forward-only".  "only" will never attempt
　　 * a full lookup; only the forwarders will be used.
　　 */
    forward first;
    forwarders { };                
　　　　// default is no forwarders
      topology { localhost; localnets; };     
　　　　// prefer local nameservers
      listen-on port 53 { any; };     
　　　　// listen for queries on port 53 on
　　    // any interface on the system
　　    // (i.e. all interfaces).  The
　　    // "port 53" is optional; if you
　　    // don't specify a port, port 53
　　    // is assumed.
    /*
     * Interval Timers
     */
    cleaning-interval 60;          
 　　　 // clean the cache of expired RRs
　　    // every 'cleaning-interval' minutes
    interface-interval 60;          
　　　　// scan for new or deleted interfaces
　　    // every 'interface-interval' minutes
    statistics-interval 60;         
　　　　// log statistics every 
　　    // 'statistics-interval' minutes
    maintain-ixfr-base no;   
　　　　// If yes, keep transaction log file for IXFR
    max-ixfr-log-size 20;        
　　　　// Not implemented, maximum size the 
　　    // IXFR transaction log file to grow
　　};

　　/*
　　 * Control listeners, for "ndc".  Every nameserver needs at least one.
　　 */
　　controls {
        inet * port 52 allow { any; };
             // a bad idea
        unix "/var/run/ndc" perm 0600 owner 0 group 0; 
　　　　　　 // the default
　　};

　　zone "rd.xxx.com" in {
        type master;                    
　　　　　　// what used to be called "primary" 
        file "rd.xxx.com.db";
        check-names fail;
        allow-update { none; };
        allow-transfer { any; };
        allow-query { any; };
        // notify yes;                  
　　　　　　// send NOTIFY messages for this
            // zone?  The global option is used
            // if "notify" is not specified
            // here.
        also-notify { };                
　　　　　　// don't notify any nameservers other
            // than those on the NS list for this
            // zone
　　};

　　zone "223.99.211.in-addr.arpa" in {
        type master;         
           // what used to be called "secondary" 
        file "21.9.22.db";
        };

　　zone "0.0.127.in-addr.arpa" in {
        type master;
        file "127.0.0.db";
　　};

　　zone "." in {
        type hint;                     
　　　　　　 // used to be specified w/ "cache"
        file "named.root";
　　};

　　logging {
        /*
         * All log output goes to one or more "channels"; you can make as
         * many of them as you want.
         */
<

上一个：Linux简明系统维护手册(五)
下一个：提问的智慧