Fedora2下面架设VPN的全过程
首先下载:以下软件包dkms-1.12-2.noarch.rpm
kernel_ppp_mppe-0.0.4-2dkms.noarch.rpm
ppp-2.4.3-0.cvs_20040527.2.fc2.i386.rpm
pptpd-1.2.1-1.i386.rpm
依次安装这些软件包
2)配置/etc/pptpd.conf
################################################################################
#
# Sample PoPToP configuration file
#
# for PoPToP version 1.1.4
#
################################################################################
# TAG: speed
#
# Specifies the speed for the PPP daemon to talk at.
#
#speed 115200
# TAG: option
#
# Specifies the location of the PPP options file.
# By default PPP looks in '/etc/ppp/options'
#
#option /etc/ppp/options.pptpd
# TAG: stimeout
#
# Specifies timeout (in seconds) on starting ctrl connection
#
# stimeout 10
# TAG: debug
#
# Turns on (more) debugging to syslog
#
#debug
# TAG: bcrelay <if>
#
# Turns on broadcast relay to clients from inte易做图ce <if>
# Not yet implemented this way. Read README.bcrelay
#
#bcrelay eth1
# TAG: localip
# TAG: remoteip
#
# Specifies the local and remote IP address ranges.
#
# You can specify single IP addresses seperated by commas or you can
# specify ranges, or both. For example:
#
# 192.168.0.234,192.168.0.245-249,192.168.0.254
#
# IMPORTANT RESTRICTIONS:
#
# 1. No spaces are permitted between commas or within addresses.
#
# 2. If you give more IP addresses than MAX_CONNECTIONS, it will
# start at the beginning of the list and go until it gets
# MAX_CONNECTIONS IPs. Others will be ignored.
#
# 3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238,
# you must type 234-238 if you mean this.
#
# 4. If you give a single localIP, that's ok - all local IPs will
# be set to the given one. You MUST still give at least one remote
# IP for each simultaneous client.
#
option /etc/ppp/options.pptpd
#localip 10.10.40.32
# remoteip 10.10.40.250-254
# or
localip 192.168.0.1
remoteip 192.168.0.2-254
netmask 255.255.255.0
2) 配置 /etc/ppp/options.pptpd
## CHANGE TO SUIT YOUR SYSTEM
lock
## turn pppd syslog debugging on
debug
dump
logfd 2
logfile /var/log/pptpd.log
## change 'pptpd' to whatever you specify as your server name in chap-secrets
name pptpd
proxyarp
#asyncmap
auth
# This option applies if you use ppp with chapms-strip-domain patch
#chapms-strip-domain
# These options apply if you use ppp with mppe patch
# NB! You should also apply the ChapMS-V2 patch
-chap
-mschap
+mschap-v2
require-mppe
lcp-echo-failure 30
lcp-echo-interval 5
ipcp-accept-local
ipcp-accept-remote
#-chapms
#+chapms-v2
#mppe-128
#mppe-stateless
multilink
3) 配置 /etc/ppp/chap-secrets
# Secrets for authentication using CHAP
# client server secret IP addresses
"vpn" pptpd "vpn" *
# 帐号名 服务名 密码 自动分配IP地址
# +++ pptpconfig added for tunnel vpn
vpn *
# --- pptpconfig added for tunnel vpn
4) 启动NAT转发机制
echo 1 > /proc/sys/net/ipv4/ip_forward
/sbin/modprobe ip_tables
/sbin/modprobe iptable_filter
/sbin/modprobe iptable_nat
/sbin/modprobe ip_conntrack
/sbin/modprobe ip_conntrack_ftp
/sbin/modprobe ip_nat_ftp
/sbin/iptables --flush INPUT
/sbin/iptables --flush FORWARD
/sbin/iptables --flush POSTROUTING --table nat
echo 2 > /proc/sys/net/ipv4/ip_dynaddr
echo 0 > /proc/sys/net/ipv4/tcp_ecn
echo 1 > /proc/sys/net/ipv4/tcp_syncookies
for f in /proc/sys/net/ipv4/conf/*/rp_filter; do
echo 1 > $f
done
echo 1 > /proc/sys/net/ipv4/ip_forward
iptables -t nat -A POSTROUTING -s 192.168.0.0/24 -j MASQUERADE
iptables -F FORWARD
iptables -P FORWARD ACCEPT
iptables -t nat -A POSTROUTING -j MASQUERADE
iptables -F FORWARD
iptables -A FORWARD -p udp -s 192.168.0.0/24 --dport 53 -j ACCEPT
iptables -A FORWARD -p tcp -s 192.168.0.0/24 --dport 1723 -j ACCEPT
iptables -A FORWARD -p gre -s 192.168.0.0/24 -j ACCEPT
iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT
至此 VPN就配置通了
但是本人有一个问题:
还望高手解决
就是VPN的客户端在通过VPN连接FTP的时候 在LIST的时候 就无法出现文件列表 请问这个问题该如何解决 应该讲这个是IPTABLES里面的问题本文来自：http://www.xiaoyaxiao.com/2868.html
发表您的高见！
