求助，用directshow进行摄像头操作，提示连接到系统上的设备没有发挥作用
用directshow操作摄像头，当摄像头数量超过5个的时候提示连接到系统上的设备没有发挥作用，4个的时候都可以正常工作代码是用的是directshow的samples改的
如下
int hr;
ISampleGrabber sampGrabber = null;
IBaseFilter capFilter = null;
IPin pCaptureOut = null;
IPin pSampleIn = null;
IPin pRenderIn = null;
// Get the graphbuilder object
m_FilterGraph = new FilterGraph() as IFilterGraph2;
try
{
#if DEBUG
m_rot = new DsROTEntry(m_FilterGraph);
#endif
// add the video input device
hr = m_FilterGraph.AddSourceFilterForMoniker(dev.Mon, null, dev.Name, out capFilter);
DsError.ThrowExceptionForHR(hr);
// Find the still pin
m_pinStill = DsFindPin.ByCategory(capFilter, PinCategory.Still, 0);
// Didn't find one. Is there a preview pin?
if (m_pinStill == null)
{
m_pinStill = DsFindPin.ByCategory(capFilter, PinCategory.Preview, 0);
}
// Still haven't found one. Need to put a splitter in so we have
// one stream to capture the bitmap from, and one to display. Ok, we
// don't *have* to do it that way, but we are going to anyway.
if (m_pinStill == null)
{
IPin pRaw = null;
IPin pSmart = null;
// There is no still pin
m_VidControl = null;
// Add a splitter
IBaseFilter iSmartTee = (IBaseFilter)new SmartTee();
try
{
hr = m_FilterGraph.AddFilter(iSmartTee, "SmartTee");
DsError.ThrowExceptionForHR(hr);
// Find the find the capture pin from the video device and the
// input pin for the splitter, and connnect them
pRaw = DsFindPin.ByCategory(capFilter, PinCategory.Capture, 0);
pSmart = DsFindPin.ByDirection(iSmartTee, PinDirection.Input, 0);
hr = m_FilterGraph.Connect(pRaw, pSmart);
DsError.ThrowExceptionForHR(hr);
// Now set the capture and still pins (from the splitter)
m_pinStill = DsFindPin.ByName(iSmartTee, "Preview");
pCaptureOut = DsFindPin.ByName(iSmartTee, "Capture");
// If any of the default config items are set, perform the config
// on the actual video device (rather than the splitter)
if (iHeight + iWidth + iBPP > 0)
{
// SetConfigParms(pRaw, iWidth, iHeight, iBPP);
}
}
finally
{
if (pRaw != null)
{
Marshal.ReleaseComObject(pRaw);
}
if (pRaw != pSmart)
{
Marshal.ReleaseComObject(pSmart);
}
if (pRaw != iSmartTee)
{
Marshal.ReleaseComObject(iSmartTee);
}
}
}
else
{
// Get a control pointer (used in Click())
m_VidControl = capFilter as IAMVideoControl;
pCaptureOut = DsFindPin.ByCategory(capFilter, PinCategory.Capture, 0);
// If any of the default config items are set
if (iHeight + iWidth + iBPP > 0)
{
SetConfigParms(m_pinStill, iWidth, iHeight, iBPP);
}
}
// Get the SampleGrabber inte易做图ce
sampGrabber = new SampleGrabber() as ISampleGrabber;
// Configure the sample grabber
IBaseFilter baseGrabFlt = sampGrabber as IBaseFilter;
ConfigureSampleGrabber(sampGrabber);
pSampleIn = DsFindPin.ByDirection(baseGrabFlt, PinDirection.Input, 0);
// Get the default video renderer
IBaseFilter pRenderer = new VideoRendererDefault() as IBaseFilter;
hr = m_FilterGraph.AddFilter(pRenderer, "Renderer");
DsError.ThrowExceptionForHR(hr);
pRenderIn = DsFindPin.ByDirection(pRenderer, PinDirection.Input, 0);
// Add the sample grabber to the graph
hr = m_FilterGraph.AddFilter(baseGrabFlt, "Ds.NET Grabber");
DsError.ThrowExceptionForHR(hr);
if (m_VidControl == null)
{
// Connect the Still pin to the sample grabber
hr = m_FilterGraph.Connect(m_pinStill, pSampleIn);
DsError.ThrowExceptionForHR(hr);
// Connect the capture pin to the renderer
hr = m_FilterGraph.Connect(pCaptureOut, pRenderIn);
DsError.ThrowExceptionForHR(hr);
}
else
{
// Connect the capture pin to the renderer
hr = m_FilterGraph.Connect(pCaptureOut, pRenderIn);
DsError.ThrowExceptionForHR(hr);
// Connect the Still pin to the sample grabber
hr = m_FilterGraph.Connect(m_pinStill, pSampleIn);
DsError.ThrowExceptionForHR(hr);
}
// Learn the video properties
SaveSizeInfo(sampGrabber);
ConfigVideoWindow(hControl);
// Start the graph
IMediaControl mediaCtrl = m_FilterGraph as IMediaControl;
hr = mediaCtrl.Run();
DsError.ThrowExceptionForHR(hr);
}
hr = mediaCtrl.Run();当跑到这步的时候就报示连接到系统上的设备没有发挥作用
--------------------编程问答-------------------- 自己顶一下，没人遇到过类似的问题么 --------------------编程问答-------------------- 不会，帮顶 --------------------编程问答-------------------- 本人项目3个高清USB启动也遇到这个问题，最后确定是硬件总线资源不足，无法启动摄像头。请尝试将摄像头连接到位于不同总线控制器的USB接口上，并避免使用USB3.0.如果依旧无法解决问题，则基本确定你需要更强劲的主板、扩展USB卡或视频监视卡以支持多摄像头。 --------------------编程问答-------------------- 虽然不知道为什么，但3楼的说法有一定道理。 --------------------编程问答-------------------- 问题解决了？本人也遇到类似的问题，但是在笔记本有自带摄像头时就没有这个问题
补充：.NET技术 , C#
