当前位置:操作系统 > Unix/Linux >>

制作RAMDISKinKERNEL的NetBSD微系统

Matthew(黑夜编码人) <matthew@cnfug.org>

  前言

  在前面我们已经讲过如何制作软盘上运行的FreeBSD和OpenBSD系统,现在我们来看看如何制作一个运行在软盘上的NetBSD系统。同软盘中的OpenBSD系统一样,我们还是将系统中的所有配制文件及程序全部存放到NetBSD的内核中,这样整个系统看起来就是一个文件。下面让我们具体来看看如何完成这样一个微系统的制作。

  0、NetBSD的启动过程

  当硬盘MBR中的引导程序接过启动之后,MBR中的程序将读入硬盘NetBSD分区中的引导程序,引导程序默认情况下会加载/boot,然后由boot载入内核/netbsd,此时内核开始检测一些硬件和做一些初始化。初始化完成后kernel将mount root device,然后启动系统初始化进程/sbin/init,init将根据/etc/rc中的设置来进行初始化等。

  1、定制RAMDISK内核

  要使用RAMDISK in KERNEL就必须在内核配制文件中加入以下选项:options MEMORY_DISK_HOOKSoptions MEMORY_DISK_IS_ROOT # force root on memory diskoptions MEMORY_DISK_SERVER=0options MEMORY_DISK_ROOT_SIZE=10000 # size of memory disk, in blocksoptions MEMORY_RBFLAGS=0x00 # boot in to multi-user modepseudo-device md 1 # memory disk device (ramdisk)

  以上的内核参数意义如下:

  MEMORY_DISK_ROOT_SIZE : 内存磁盘大小,以块为单位MEMORY_RBFLAGS=0x00 : 启动到多用户模式

  以下是在我机器上使用的一个内核配制文件include "arch/i386/conf/std.i386"

  #options INCLUDE_CONFIG_FILE # embed config file in kernel binary

  makeoptions COPTS="-Os" # Optimise for space. Implies -O2

  # Enable the hooks used for initializing the root memory-disk.options MEMORY_DISK_HOOKSoptions MEMORY_DISK_IS_ROOT # force root on memory diskoptions MEMORY_DISK_SERVER=1 # 0 readonly 1 writableoptions MEMORY_DISK_ROOT_SIZE=10000 # size of memory disk, in blocksoptions MEMORY_RBFLAGS=0x00 # boot in to multi-user mode

  maxusers 48 # estimated number of users

  # CPU support. At least one is REQUIRED.options I386_CPUoptions I686_CPU

  # CPU-related options.options MATH_EMULATE # floating point emulation

  

  # This option allows you to force a serial console at the specified# I/O address.#options CONSDEVNAME=""com"",CONADDR=0x3f8,CONSPEED=9600

  # Avoid irq 5 and 7, the most likely cause of problems on modern laptops.options PCIC_ISA_INTR_ALLOC_MASK=0xff5f

  # Standard system options

  options INSECURE # disable kernel security levels

  options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT#options NTP # NTP phase/frequency locked loop

  options USERCONF # userconf(4) supportoptions PIPE_SOCKETPAIR # smaller, but slower pipe(2)options MALLOC_NOINLINE # Not inlining MALLOC saves memory

  # File systemsfile-system FFS # UFSfile-system MFS # memory file systemfile-system MSDOSFS # MS-DOS file systemfile-system KERNFS # /kern

  options VNODE_OP_NOINLINE # Not inlining vnode op calls saves mem

  # Networking optionsoptions GATEWAY # packet forwardingoptions INET # IP + ICMP + TCP + UDP#options PFIL_HOOKS # pfil(9) packet filter hooks

  # builtin terminal emulationsoptions WSEMUL_VT100 # VT100 / VT220 emulation# different kernel output - see dev/wscons/wsdisplayvar.hoptions WS_KERNEL_FG=WSCOL_BLACKoptions WS_KERNEL_BG=WSCOL_WHITE# compatibility to other console drivers#options WSDISPLAY_COMPAT_PCVT # emulate some ioctls#options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls#options WSDISPLAY_COMPAT_USL # VT handling#options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes# see dev/pckbc/wskbdmap_mfii.c for implemented layouts#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"# allocate a number of virtual screens at autoconfiguration time#options WSDISPLAY_DEFAULTSCREENS=4# use a large software cursor that doesn't blinkoptions PCDISPLAY_SOFTCURSOR# modify the screen type of the console; defaults to "80x25"#options VGA_CONSOLE_SCREENTYPE=""80x24""

  

  # Kernel root file system and dump configuration.config netbsd root on ? type ?#config netbsd root on sd0a type ffs#config netbsd root on ? type nfs

  ## Device configuration#

  mainbus0 at root

  cpu* at mainbus?

  apm0 at mainbus0 # Advanced power management

  # Basic Bus Support

  # PCI bus supportpci* at mainbus? bus ?pci* at pchb? bus ?pci* at ppb? bus ?

  # PCI bridgespchb* at pci? dev ? function ? # PCI-Host bridgespceb* at pci? dev ? function ? # PCI-EISA bridgespcib* at pci? dev ? function ? # PCI-ISA bridgesppb* at pci? dev ? function ? # PCI-PCI bridges# XXX 'puc's aren't really bridges, but there's no better place for them herepuc* at pci? dev ? function ? # PCI "universal" comm. cards

  # ISA bus supportisa0 at mainbus?isa0 at pceb?isa0 at pcib?

  # ISA Plug-and-Play bus supportisapnp0 at isa?

  # Coprocessor Support

  # Math Coprocessor supportnpx0 at isa? port 0xf0 irq 13 # x86 math coprocessor

  # Console Devices

  # ISA console#pc0 at isa? port 0x60 irq 1 # pccons generic PC console driver

  # wsconspckbc0 at isa? # pc keyboard controllerpckbd* at pckbc? # PC keyboard#pms* at pckbc? # PS/2 mouse for wsmousevga0 at isa?vga* at pci? dev ? function ?pcdisplay0 at isa? # CGA, MDA, EGA, HGAwsdisplay* at vga? console ?wsdisplay* at pcdisplay? console ?wskbd* at pckbd? console ?#wsmouse* at pms? mux 0

  pcppi0 at isa?sysbeep0 at pcppi?

  # Serial Devices

  # PCI serial inte易做图cescom* at puc? port ? # 16x50s on "universal" comm boards#cy* at pci? dev ? function ? # Cyclades Cyclom-Y serial boards

  # ISA Plug-and-Play serial inte易做图cescom* at isapnp? # Modems and serial boards

  # ISA serial inte易做图ces#options COM_HAYESP # adds Hayes ESP serial board supportcom0 at isa? port 0x3f8 irq 4 # Standard PC serial portscom1 at isa? port 0x2f8 irq 3com2 at isa? port 0x3e8 irq 5#com3 at isa? port 0x2e8 irq 9#ast0 at isa? port 0x1a0 irq 5 # AST 4-port serial cards#com* at ast? slave ?#boca0 at isa? port 0x100 irq 5 # BOCA 8-port serial cards#com* at boca? slave ?#tcom0 at isa? port 0x100 irq 7 # TC-800 8-port serial cards#com* at tcom? slave ?#rtfps0 at isa? port 0x1230 irq 10 # RT 4-port serial cards#com* at rtfps? slave ?#cy0 at isa? iomem 0xd4000 irq 12 # Cyclades serial cards

  

  # Miscellaneous mass storage devices

  # Network Inte易做图ces

  # PCI network inte易做图cesfxp* at pci? dev ? function ? # Intel EtherExpress PRO 10+/100Ble* at pci? dev ? function ? # PCnet-PCI Ethernetpcn* at pci? dev ? function ? # AMD PCnet-PCI Ethernetrtk* at pci? dev ? function ? # Realtek 8129/8139

  amhphy* at mii? phy ? # AMD 79c901 Ethernet PHYsurlphy* at mii? phy ? # Realtek RTL8150L internal PHYsukphy* at mii? phy ? # generic unknown PHYs

  # Pseudo-Devices

  # disk/mass storage pseudo-devicespseudo-device md 1 # memory disk device (ramdisk)#pseudo-device vnd 4 # disk-like inte易做图ce to files

  # network pseudo-devicespseudo-device bpfilter 8 # Berkeley packet filterpseudo-device ipfilter # IP filter (firewall) and NATpseudo-device loop # network loopbackpseudo-device ppp 2 # Point-to-Point Protocolpseudo-device pppoe 3

  # miscellaneous pseudo-devicespseudo-device pty 2 # pseudo-terminals (Sysinst needs two)# wscons pseudo-devicespseudo-device wsmux # mouse & keyboard multiplexor#pseudo-device wsfont


  2、制作ramdisk镜像# dd if=/dev/zero of=/ramdisk bs=512 count=9000# vnconfig -c /dev/vnd0d /ramdisk# disklabel -r -w /dev/vnd0d rdroot# newfs -m 0 -S 512 -i 4096 /dev/vnd0a# mount /dev/vnd0a /mnt# mkdir /mnt/{d
CopyRight © 2022 站长资源库 编程知识问答 zzzyk.com All Rights Reserved
部分文章来自网络,