imx515 android编译脚本

＃!/bin/sh
#Command to build for i.MX51 BBG board is:
make distclean
make mx51_bbg_android_config
make
#"u-boot.bin" is generated if you have a successful build

#Build Kernel Image
export PATH=$/opt/imx515/source/myandroid/myandroid/bootable/bootloader/uboot-imx/tools:$PATH
cd $/opt/imx515/source/myandroid/kernel_imx
echo $ARCH && echo $CROSS_COMPILE
export CROSS_COMPILE=$/opt/imx515/source/myandroid/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi-
make imx5_android_defconfig
make uImage

#Generate uImage to be loaded by u-boot
cd $/opt/imx515/source/myandroid/kernel_imx/arch/arm/boot
$/opt/imx515/source/myandroid/bootable/bootloader/uboot-imx/tools/mkimage -A arm -O linux -T kernel -C none -a 0x90008000 -e 0x90008000 -n "Android Linux Kernel" -d ./zImage ./uImage
# During boot, when uboot try to load above "uImage", it will know to load it (without image head added by mkimage tool) into 0x90008000 or 0x70008000 (specified by "-a"), and then jump to 0x90008000 or 0x70008000 (specified by "-e") to execute it. "-C none" means no compression when generating "uImage". This is because the original zImage is already a compressed one.

#Build Android Image

cd $/opt/imx515/source/myandroid
export CROSS_COMPILE=$/opt/imx515/source/myandroid/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi-
make PRODUCT-imx51_bbg-eng 2>&1 | tee build_imx51_bbg_android.log
#For i.MX51 BBG build, the following outputs are generated as default under myandroid/out/target/product/imx51_bbg
#Above three folders can be used to create your Android file system for NFS mounting, i.e. root/ > /, system/ > /system, data/ > /data

#    recovery/: root file system when booting in "recovery" mode. Not directly used.
#       ramdisk.img: Ramdisk image generated from "root/". Not directly used.
#           system.img: EXT4 image generated from "system/". Can be programmed to "SYSTEM" partition on SD card with "dd"
#               userdata.img: EXT4 image generated from "data/".
#                   recovery.img: EXT4 image generated from "recovery/". Can be programmed to "RECOVERY" partition on SD card with "dd"

cd $/opt/imx515/source/myandroid/out/target/product/imx51_bbg
$/opt/imx515/source/myandroid/bootable/bootloader/uboot-imx/tools/mkimage -A arm -O linux -T ramdisk -C none -a 0x90308000 -n "Android Root Filesystem" -d ./ramdisk.img ./uramdisk.img

补充：综合编程 , 其他综合 ,